Before You Start: What Wall Tracks Are Designed to Do
Cambro Wall Tracks provide a practical mounting solution for organizing your space. They are designed for durability and easy installation, helping keep items within reach while maintaining a clean, professional look. Ideal for use in commercial kitchens, storage areas, or any setting requiring efficient organization, these tracks integrate with existing Cambro systems to create a flexible storage setup.
Before you begin installation, confirm that your wall surface can support the track and the items you plan to hang. The tracks are constructed to withstand the demands of everyday use, but proper mounting is essential for safety and longevity.
Step-by-Step Installation Process
Follow these general steps to mount your wall tracks. Since specific hardware and wall types vary, always use appropriate anchors and tools for your wall material.
- Plan the layout: Decide where you want the tracks to go. Consider the height and spacing needed for the items you will store. Use a level to mark a straight line where the top of the track will sit.
- Mark mounting points: Hold the track against the wall at your marked line. Use a pencil to mark the screw holes through the track. Ensure marks are evenly spaced and aligned.
- Drill pilot holes: Using a drill bit appropriate for your wall type (drywall, concrete, or tile), drill pilot holes at each marked point. This prevents the wall material from cracking and makes screw insertion easier.
- Insert wall anchors (if needed): For drywall or hollow walls, insert appropriate wall anchors into the pilot holes. Tap them gently until they are flush with the wall surface. For solid walls like concrete, you may skip this step if using masonry screws.
- Mount the track: Position the track over the anchors or holes. Insert screws through the track slots and tighten them with a screwdriver or drill. Do not overtighten, as this could damage the track or wall. Ensure the track is level and secure.
- Test stability: Gently pull on the mounted track to confirm it is firmly attached. Do not load it with heavy items until you are confident the installation is secure.
What the Product Record Confirms
- Wall Tracks: Cambro Wall Tracks provide a practical mounting solution for organizing your space. Designed for durability and easy installation, these tracks help keep items within reach while maintaining a clean, professional look. This confirms the tracks are built for frequent use and simple mounting, making them suitable for busy kitchen environments.

Wall Tracks - Wall Tracks: Part of the Cambro product line, known for reliable food service and storage solutions. Simple, functional design that integrates with existing Cambro systems. If you already use Cambro shelving or storage components, these tracks can expand your system without compatibility issues.
Hardware and Tools You Will Need
The supplied product information does not list specific screws or anchors included with the wall tracks. For a secure installation, you will likely need: a drill with appropriate bits, a level, a pencil, a screwdriver, wall anchors suitable for your wall type, and screws that fit the track slots. If mounting into studs, use wood screws. For concrete or brick, use masonry anchors and screws. Always choose hardware rated for the weight you plan to hang.
What the Supplied Information Does Not Cover
The product record does not specify maximum load limits, exact screw sizes, or detailed installation instructions for every wall type. For heavy or critical storage, consult a professional installer or contact Cambro directly for additional guidance. Always follow local building codes and safety standards when mounting storage equipment.

